ETEPON Digital Oscilloscope Kit with BNC-Clip Cable Probe (Assembled) EM001

Description

ETEPON Digital Oscilloscope Kit with BNC-Clip Cable Probe (Assembled Finished Machine) EM001
ASSEMBLED FINISHED: ETEPOPN EM001 digital DIY oscilloscope kit with case is an assembled finished machine No soldering/assembly work needs It can be used directly to avoid assembling /welding process problems and greatly save your time
UPGRADED VERSION: The sensitivity of the EM001 has been extended both in width and height which is wider and higher than the others It reaches 5mV/div - 20V/div while the others is only 10mV/div - 5v/div
HAND-HELD: This updated digital oscilloscope can be hand-held while the others can only be used by placing it on the desktop
ROTARY ENCODER: It has been added the rotary encoder makes parameter adjustment more quicker and easier
WHAT YOU GET: You will get a assembled oscilloscope and BNC-clip cable Detailed Operation instructions troubleshooting guide and schematic are also provided
oscilloscope 2.4”
Advanced Features
No need do assembly or soldering work
Extended both in width and height
Easily measuring
Sensitivity extended
Hand-held
Detailed instruction
Easily capture instantaneous wave forms using the Auto/Normal/Single Trigger mode.
Adapter Added Version
Thanks for some customers' advice, we have updated this oscilloscope and added a suitable adapter for it.
ETEPON EM001 Digital Oscilloscope
Advanced Assembled Finished Machine
ETEPON EM001 digital oscilloscope kit 2.4” TFT is an assembled finished machine which can be used directly.
Unlike DIY oscilloscope kit, you don’t need to do assembly or soldering work before using, which will avoid some problem caused on soldering or assembling process and save your time.
Detailed Operation instructions, troubleshooting guide and schematic are also provided.
POWER SUPPLY INCLUDED
Pofessional Assembled
Display and MCU are mounted on the same board (mainboard) to avoid using inter-board pin-headers. Analog channel is placed on a separated board which contains most user install parts, so the analog and digital circuits can be better separated.
Sensitivity Extended
The sensitivity of the EM001 has been extended both in width and height, which is wider and wider than the others. It reaches 5mV / div - 20V / div, while others is only 10mV / div - 5v / div.
Hand-Held
This updated digital oscilloscope can be hand-held, while the others can only be used by placing it on the desktop.
Measuring Easily
Using the Auto/Normal/Single Trigger mode,it is easy to capture instantaneous waveform.
Rotary Encoder
It has been added the rotary encoder, makes parameter adjustment quicker and easier.
Hold Function
You can freeze waveform display at any time.And with waveform storage function you will not lose the waveform after power off.
ETEPON EM001 oscilloscope
Number of Channel
1
Analog Bandwidth
0 - 200KHz
Sensitivity
5mV/Div - 20V/Div
Sensitivity error
< 5%
Resolution
12-bit
Input Impedance
1M ohm
Maximum Input voltage
50Vpk
Coupling
DC, AC, GND
Trigger Modes
Auto, Normal, Single
Trigger Types
Rising/falling edge
Trigger Position
1/2 of buffer size fixed
Display
2.4 inch color TFT LCD with 320 x 240 resolution
Power Supply
9V DC (8 - 10V acceptable)
Dimension
115mm X 75mm X 22mm
Weight
100 gram